Superchips flashpaq 3815 - Page 4

Page 7 of 24 Form 0151H 3815 06/11/2008 Superchips Inc
.
Superchips Inc. 1790 East Airport Blvd., Sanford, FL. 32773 (407) 585-7000 http://www.superchips.com
Superchip & Superchips are registered trademarks of Superchips, Inc.
Section A – Overview of
FLASH
FLASHFLASH
FLASHPAQ
PAQPAQ
PAQ
4. Quick Start – The FLASHPAQ Setup
From the Opening Screen - FLASHPAQ Setup
*** Press DOWN to scroll as needed ***
1) Press ENTER – after selection of FLASHPAQ Setup
2) Press ENTER – after selection of About
3) Screen Displays:
• Product Description
• Product Part Number
• “Operating Software” Firmware (F/W) Version #
 Visit
www.superchips.com for the latest
updates
• Calibration (Tuning File) Database Version #
 Visit www.superchips.com for the latest
updates
• Product Serial Number
4) Press EXIT – Returns to the Opening Screen
 From the FLASHPAQ Setup Screen – Set screen Contrast
1) Press ENTER – after selection of FLASHPAQ Setup
2) Press ENTER – after selection of Set Contrast
3) Press DOWN/UP & SAVE – adjusts screen Contrast to
increase or decrease (text/graphics darkness)
 From the FLASHPAQ Setup Screen – Set screen Backlight
1) Press ENTER – after selection of Set Backlight
2) Press DOWN/UP & SAVE – adjusts screen Backlight to
increase or decrease (screen brightness)
3) Press EXIT – returns to Flashpaq opening screen
Page 8 of 24 Form 0151H 3815 06/11/2008 Superchips Inc
.
Superchips Inc. 1790 East Airport Blvd., Sanford, FL. 32773 (407) 585-7000 http://www.superchips.com
Superchip & Superchips are registered trademarks of Superchips, Inc.
Section A – Overview of FLASHPAQ
FLASHPAQFLASHPAQ
FLASHPAQ
5. Quick Start – Program my vehicle with Superchips NOW!!!
Please follow the steps below to program your vehicle
*** Press DOWN to scroll as needed ***
 From the opening screen
1) Press ENTER – selects Performance Tuning
2) Press ENTER – selects Read Vehicle
3) Press ENTER – selects Read Stock
4) Follow ON SCREEN – Vehicle Ignition Switch ON/OFF/ON
(DO NOT START VEHICLE!!)
5) Press EXIT – returns you to the previous screen
 From this screen
1) Press ENTER – selects Change Setup
2) Press ENTER – selects Power Level
3) Press SAVE – selects the highlighted tuning level
4) Press EXIT – returns you to previous screen
 From this screen
1) Press ENTER – selects Program Vehicle
2) Follow ON SCREEN – Vehicle Ignition Switch OFF/ON
(DO NOT START VEHICLE!!)
Upon completion, remove cable from vehicle.
Your vehicle is now programmed with Superchips tuning! You may
now start your vehicle.