Page 9 of 24 Form 0151H 3815 06/11/2008 Superchips Inc
.
Superchips Inc. 1790 East Airport Blvd., Sanford, FL. 32773 (407) 585-7000 http://www.superchips.com
Superchip & Superchips are registered trademarks of Superchips, Inc.
Section A – Overview of
FLASHPAQ
FLASHPAQFLASHPAQ
FLASHPAQ
6. Quick Start – Program my vehicle with User Options NOW!!!
Please follow the steps below to program your vehicle
*** Press DOWN to scroll as needed ***
*** Press MINUS/PLUS to adjust as needed***
From the opening screen
1) Press ENTER – after selection of Performance Tuning
2) Press ENTER – after selection of Read Vehicle
3) Press ENTER – after selection of Read Stock
4) Follow ON SCREEN – Vehicle Ignition Switch ON/OFF/ON
(DO NOT START VEHICLE!!)
5) Press EXIT – returns you to the previous screen
From this screen
1) Press ENTER – after selection of Change Setup
2) Press ENTER – after selection of Power Level
3) Press SAVE – after selection of the highlighted tuning level
4) Press ENTER – after selection of Options
5) Press ENTER – after selection of Rev Limiter
6) Press SAVE – after adjusting Rev Limiter
7) Press ENTER – after selection of Speed Limiter
8) Press SAVE – after adjusting Speed Limiter
9) Press ENTER – after selection of 1-2 WOT Shift *
10) Press SAVE – after adjusting 1-2 WOT Shift
11) Press ENTER – after selection of 2-3 WOT Shift *
12) Press SAVE – after adjusting 2-3 WOT Shift
13) Press ENTER – after selection of Tire Size **
14) Press SAVE – after adjusting Tire Size Height
15) Press EXIT – returns you back one screen
From this screen
1) Press ENTER – selects Program Vehicle
2) Follow ON SCREEN – Vehicle Ignition Switch ON/OFF/ON
(DO NOT START VEHICLE!!)
Upon completion, remove cable from vehicle.
Your vehicle is now programmed with Superchips and user options!
You may now start your vehicle.
See page 14 for options *, **
Page 10 of 24 Form 0151H 3815 06/11/2008 Superchips Inc
.
Superchips Inc. 1790 East Airport Blvd., Sanford, FL. 32773 (407) 585-7000 http://www.superchips.com
Superchip & Superchips are registered trademarks of Superchips, Inc.
Section A – Overview of
FLASHPAQ
FLASHPAQFLASHPAQ
FLASHPAQ
7. Quick Start – Return my vehicle to factory stock NOW!!!
Please follow the steps below to program your vehicle
*** Press DOWN to scroll as needed ***
From the opening screen
1) Press ENTER – after selection of Performance Tuning
2) Press ENTER – after selection of Change Setup
3) Follow ON SCREEN – Vehicle Ignition Switch ON/OFF/ON
(DO NOT START VEHICLE!!)
1) Press ENTER – after selection of Power Level
2) Press SAVE – after selection of the Stock tuning level
3) Press EXIT – returns you to previous screen
From this screen
1) Press ENTER – after selection of Program Vehicle
2) Follow ON SCREEN – Vehicle Ignition Switch OFF/ON
(DO NOT START VEHICLE!!)
Upon completion, remove cable from vehicle.
Your vehicle’s program is now returned to factory stock. You may
now start your vehicle.
To Next Page
Loading...
