7
ABOUT THE SUPERMAX TOOLS DRUM SANDER
This manual is designed to help familiarize you with your SuperMax Tools drum sander, and to help you take
advantage of its exclusive features. By understanding its major components, and how they work together, you
will be able to get the most from your investment.
The SuperMax Tools drum sander is basically made up of:
1.
2. Shroud.
3. Depth scale.
4. Knob to start feed conveyor and selects feed rate.
5. Starts and stops the motors.
6. Conveyor table.
7. Tension roller contact adjustment.
8. Drum carriage.
UNPACKING YOUR SUPERMAX TOOLS DRUM SANDER
result of shipment, notify the transportation company as soon as possible and ask them to make an immediate
inspection. Ask for a damage or loss report. Also notify your distributor of any loss or damage during shipment.
See enclosed Warranty Statement.
NOTE: Before setting up make sure that the space is adequate for your new equipment. We also recommend
that there is more than one person available for lifting and initial set up procedures.
TO AVOID PROBLEMS AND POTENTIAL DAMAGE TO THE MACHINE, PLEASE READ THROUGH THE
UNPACKING INSTRUCTIONS BELOW BEFORE PROCEEDING TO SET UP THE MACHINE IN YOUR SHOP.
1
3
4
5
7
6
8
2
To Next Page
Loading...
