C-2
Supermicro C7B360-CB-M/MW Motherboard User’s Manual
C-3 To Recover the Main BIOS Block Using a USB-
Attached Device
This feature allows the user to recover a BIOS image using a USB-
attached device without additional utilities used. A USB ash device such
as a USB Flash Drive, or a USB CD/DVD ROM/RW device can be used for
this purpose. However, a USB Hard Disk drive cannot be used for BIOS
recovery at this time.
To perform UEFI BIOS recovery using a USB-attached device, follow the
instructions below.
1. Using a different machine, copy the "Super.ROM" binary image le
into the disc Root "\" Directory of a USB device or a writeable CD/
DVD.
Note: If you cannot locate the "SUPER.ROM" le in your driver
disk, visit our website at www.supermicro.com to download the
BIOS package. Extract the BIOS binary image into a USB ash
device and rename it "SUPER.ROM" for the BIOS recovery use.
2. Insert the USB device that contains the new BIOS image ("SUPER.
ROM") into any available USB port. Be sure the le is saved in the
very top (root) folder.
3. With the USB device inserted, power on the system.
4. After locating the new BIOS binary image, the system will enter the
BIOS Recovery menu as shown below.