2-4
Supermicro C7C242-CB-M/MW Motherboard User’s Manual
2. Gently lift the load lever to open the load plate. Remove the plas-
tic cap.
3. Use your thumb and your index nger to hold the CPU at the North
center edge and the South center edge of the CPU.
4. Align the small triangle marker on the CPU to its corresponding tri-
angle marker on the load bracket. Once it is aligned, carefully lower
the CPU straight down into the socket. (Do not drop the CPU on the
socket. Do not move the CPU horizontally or vertically.)
South Center Edge
North Center Edge
To Next Page
Loading...
