Supermicro C7C242-CB-M - Page 34

2-10
Supermicro C7C242-CB-M/MW Motherboard User’s Manual
Memory Population Guidelines
When installing memory modules, the DIMM slots should be populated in
the following order: DIMMA2, DIMMB2, then DIMMA1, DIMMB1.
• Always use DDR4 DIMM modules of the same size and speed.
• Mixed DIMM speeds can be installed. However, all DIMMs will run at the
speed of the slowest DIMM.
DIMMA2 DIMMB2 DIMMB1 DIMMA1
Towards the CPU
Recommended
Population
One DIMM
Two DIMM
Four DIMM