Supermicro C7C242-CB-M - Page 82

4-20
Supermicro C7C242-CB-M/MW Motherboard User’s Manual
IPSEC Certicate
This feature enables IPSEC certicate for Ikev. The options are Disabled
and Enabled.
PXE boot wait time
Enter a value for the wait time (in seconds) to press the ESC key to
abort the PXE boot. The default is 0.
Media detect count
Enter a value for the number of times the presence of media will be
checked. The default is 1.

Trusted Computing
Note: This submenu will only appear when a TPM device is installed.
Security Device Support
This feature enables BIOS support for security devices. The options are
Disabled and Enabled.
TPM State
This feature enables the TPM device "On" state. Changing this setting will
reboot the system. The options are Disabled and Enabled.
Pending operation
This feature schedules an operation for the security device. Changing
this setting will reboot the system. The options are None and TPM Clear.
Device Select
This feature controls the TPM device type that is supported. The options
are TPM 1.2, TPM 2.0, and Auto.
Current Status Information
The following information is displayed:
• TPM Enabled Status
• TPM Active Status
• TPM Owner Status