4-58
Supermicro C7Z170-SQ Motherboard User’s Manual
The following information for USB Conguration is displayed.
• USB Module Version
• USB Controllers
• USB Devices
Legacy USB Support
Select Enabled to support legacy USB devices. Select Auto to disable
legacy support when legacy USB devices are not present. If Disable
is selected, legacy USB devices will not be supported. The options are
Enabled, Disabled, and Auto.
The following information for the PCH Firmware is displayed.
• ME Firmware Version
• ME Firmware Mode
• ME Firmware SKU
ME FW Image Re-Flash
This item will update the PCH Firmware from an image in a USB Flash-
drive attached to a USB port. The options are Disabled and Enabled.
USB Configuration
To Next Page
Loading...
