Supermicro C9Z790-CG - Page 106

Super C9Z790-CG/-CGW User's Manual
106
Interface ID
Enter the 64-bit alternative interface ID for the device.
DAD Transmit Count
Enter a value for Duplicate Address Detection (DAD) Transmit Count. A value of zero
indicates the DAD is not performed. The default is 1.
Policy
Use this feature to set the Policy. The options are Automatic and Manual.
*If this feature above (Policy) is set to Manual, the following features will become
available for conguration:
Advanced Conguration
New IPv6 Address - Enter a new IPv6 address.
New Gateway Addresses - Enter the new IP address of the gateway.
New DNS Addresses - Enter the new IP address of the DNS.
Commit Changes and Exit
Select this feature to save the changes you've made and return to the upper congu-
ration page.
Discard Changes and Exit
Select this feature to discard all the changes and return to the upper conguration page.
Save Changes And Exit
Select this feature to save the changes you've made and exit the BIOS.
Note: Whenever you change the network congurations, you must use the Save &
Exit feature to apply the changes.
PCH-FW Conguration
PCH-FW Conguration
The following information for the PCH rmware will be displayed.