Supermicro C9Z790-CG - Installing a CPU Heatsink

26
Super C9Z790-CG/-CGW User's Manual
Installing a CPU Heatsink
Note 1: The installation described in this section is for reference only. The actual in-
stallation steps may vary depending on the CPU heatsink model. Please refer to the
heatsink instruction for more details.
Note 2: Graphic drawings included in this manual are for reference only. They might
look di󰀨erent from the components installed in your system.
1. Loosen four screws to release the backplate. Note that one screw is not shown in the
illustration below.
Heatsink
Backplate
Unscrew
Unscrew
Unscrew
2. If there is a thin layer of protective lm on the backplate, please remove it.
Protective lm
Backplate
top side