13
Chapter 1: Introduction
Quick Reference Table
Jumper Description Default Setting
CLEAR CMOS Clear CMOS Button Push Button Switch
JD1 Speaker / Buzzer
Pins 1-4: External Speaker
Pins 3-4: Buzzer (Default)
JPME2 Intel Manufacturing Mode Pins 1-2: Normal
JWD1 Watch Dog Function Enable Pins 1-2: Reset
POWER BUTTON Internal Power Button Push Button Switch
RESET BUTTON Onboard System Reset Button Push Button Switch
SW1 Back Panel Clear CMOS Switch Push Button Switch
LED Description Color/State
BOOT LED Bootable Device Power-On Self-Test (POST) Status
Bootable Device POST: Orange ON
Bootable Device POST Completion: OFF
CPU LED CPU Power-On Self-Test (POST) Status
CPU POST: Yellow ON
CPU POST Completion: OFF
DIMM LED DIMM Power-On Self-Test (POST) Status
DIMM POST: Blue ON
DIMM POST Completion: OFF
LED1
Onboard Power LED
S3 (Suspend to RAM) LED
Power On: Green On
S3: Green Blinking
LED17 WLAN Power-On Self-Test (POST) Status
WLAN POST: Green ON
WLAN POST Completion: OFF
LED18 Bluetooth Device Power-On Self-Test (POST) Status
Bluetooth Device POST: Green ON
Bluetooth Device POST Completion:
OFF
LED2, LED3, LED4801 M.2 LEDs for M.2-P2 / M.2-P1 / M.2-C1
PCIe Device Detected: Green ON
Activity: Green Blinking
LED4 BIOS POST Code LED Digital Readout
VGA LED Onboard VGA Power-On Self-Test (POST) Status
Onboard VGA POST: Green ON
Onboard VGA POST Completion: OFF
Note: The table above is continued on the next page.
To Next Page
Loading...
