Supermicro C9Z790-CG - Page 14

14
Super C9Z790-CG/-CGW User's Manual
Connector Description
12V_PUMP_PWR1 12V 4-pin Power Connector (for CPU Liquid Cooling Pump)
AUDIO FP Front Panel Audio Header
B1 Onboard Battery
COM1 COM Header
CPU_FAN1, CPU_FAN2
SYS_FAN1 - SYS_FAN3
CPU_FAN1, CPU_FAN2: CPU Fan Headers
SYS_FAN1 - SYS_FAN3: System Fan Headers
DP/HDMI Back Panel DisplayPort 1.4b / High-Denition Multimedia Interface 2.1
HD AUDIO High Denition Audio Ports
I-SATA0 - I-SATA5 (Intel Z790) SATA 3.0 Ports (6Gb/sec)
JF1
Front Control Panel Header
* Please align the printed indications on the S-Connector with the corresponding pins on JF1
when plugging in.
JL1 Chassis Intrusion Header
JLED_POGO1, JLED_POGO2
Pogo Pin Headers
* Provide power to LED boards in M.2 heatsinks (M.2-C1 and M.2-P1 only).
JLED1 3-pin Power LED Indicator Header
JLED_IO 4-pin Connector (for the LED board pre-installed inside the I/O cover)
JPW1 24-pin ATX Main Power Connector (Required)
JPW2 +12V 8-pin CPU Power Connector (Required)
JRLED1, JRLED2
5V 3-pin Addressable RGB (ARGB) LED Connection Headers
* The two headers are for the 5V 3-pin ARGB LED connections only.
JSD1 SATA Disk-On-Module (DOM) Power Connector
JSTBY1 5V Standby Power Header
JTPM1 Trusted Platform Module (TPM)/Port 80 Header (TPM 2.0 only)
LAN1/LAN2 RJ45 1GbE/10GbE LAN Ports
M.2-C1
PCIe 4.0 x4 M.2 M-Key Socket (from CPU)
* Supports M.2 2260/2280 modules (NVMe SSD storage devices) and RAID 0/1/5.
M.2-E1 (CNVi) WiFi 6E + Bluetooth 5.3 (Pre-installed, C9Z790-CGW only)
M.2-P1, M.2-P2
PCIe 3.0 x4 M.2 M-Key Sockets (from PCH)
* Support M.2 2260/2280/22110 modules (NVMe SSD storage devices) and RAID 0/1/5.
(PCH) SLOT1, SLOT 5 PCIe 3.0 x1 Slots
(CPU) SLOT4
PCIe 5.0 x8 (IN x16) Slot
* SLOT4 shares PCIe x16 link with SLOT7. SLOT7 will change to PCIe 5.0 x8 link when
SLOT4 is installed with a graphics card.
(CPU) SLOT7
PCIe 5.0 x16 Slot
* Always install the graphics card into SLOT7 rst to maximize performance.
SP1 Internal Speaker/Buzzer
USB0/1/2/3 Back Panel USB 2.0 Ports (Type-A)
USB4/5 Front Panel Accessible USB 2.0 Header
USB6 Back Panel USB 3.2 Gen 2 Port (10Gb, Type-A)
USB7 Back Panel USB 3.2 Gen 2x2 Port (20Gb, Type-C)
USB8 Back Panel USB 3.2 Gen 2 Port (10Gb, Type-A)
USB9 Back Panel USB 3.2 Gen 2x2 Port (20Gb, Type-C)
USB10 /11 Front Panel Accessible USB 3.2 Gen 1 Header (5Gb)
USB12 Front Panel Accessible USB 3.2 Gen 2x2 20-pin Header (20Gb, Type-C)