Supermicro C9Z790-CG - Page 109

Chapter 4: UEFI BIOS
109
NVMe Firmware Source
Use this feature to select the NVMe rmware to support booting. The options are Vendor
Dened Firmware and AMI Native Support. The default option, Vendor Dened Firmware,
is pre-installed on the drive and may resolve errata or enable innovative functions for the
drive. The other option, AMI Native Support, is o󰀨ered by the BIOS with a generic method.
Consistent Device Name Support
Use this feature to enable device name support for onboard devices and slots. The options
are Disabled and Enabled.
PCIe/PCI/PnP Conguration
PCH SLOT1 PCI-E 3.0 X1 OPROM / PCH SLOT5 PCI-E 3.0 X1 OPROM / CPU SLOT4
PCI-E 5.0 X8 (IN x16) OPROM / CPU SLOT7 PCI-E 5.0 X16 OPROM / PCIE M.2-P1
OPROM / PCIE M.2-P2 OPROM / PCIE M.2-C1 OPROM
Select Disabled to deactivate the selected slot or EFI to activate the slot in UEFI mode.
The options are Disabled and EFI.
Onboard LAN1 Support / Onboard LAN2 Support
Use this feature to enabled the onboard LAN1 / LAN2 device. The options are Disabled
and Enabled.
Onboard LAN1 Option ROM
Use this feature to select a desired rmware function to be loaded for onboard LAN1. The
options are Disabled and EFI.
Onboard LAN2 Option ROM
Use this feature to select a desired rmware function to be loaded for onboard LAN2. The
options are Disabled and Enabled.
Note: This feature is available for conguring when the Onboard LAN1 Option ROM
set to Disabled.
Power & Performance
CPU - Power Management Control
Intel(R) SpeedStep(tm)
Intel SpeedStep Technology allows the system to automatically adjust processor voltage
and core frequency in an e󰀨ort to reduce power consumption and heat dissipation. Please
refer to Intel’s website for detailed information. The options are Disabled and Enabled.