Supermicro C9Z790-CG - Page 113

Chapter 4: UEFI BIOS
113
*If this feature is set to Disabled, the following feature will become available for
conguration:
Map this Root Port under VMD
Use this feature to map or unmap a Root Port to VMD. The options are Disabled and
Enabled.
Root Port BDF details
Display the information of the Root Port BDF.
Secure Boot
Information for the following is displayed:
• System Mode
• Secure Boot
Secure Boot
Select Enabled for Secure Boot ow control. This feature is available when the platform
key (PK) is pre-registered and enabled the Secure Boot, the platform operates in the user
mode. The options are Disabled and Enabled.
Secure Boot Mode
This feature allows selection of the Secure Boot Mode between Standard and Custom.
Selecting Custom enables you to change the Image Execution Policy and manage Secure
Boot Keys. The options are Custom and Standard.
*If this feature above is set to Custom, the features below will become available for
conguration:
Enter Audit Mode
This submenu can only be used if current System Mode is set to User (refer to Exit Deployed
Mode). The PK variable will be erased on transition to Audit Mode.
Enter Deployed Mode
Press <Enter> button to switch between Deployment and User Mode.
Exit Deployed Mode
Press <Enter> button to switch between Deployment and User Mode.