Supermicro C9Z790-CG - Page 117

Chapter 4: UEFI BIOS
117
OsRecovery Signatures
Details
Review details on current settings of the OsRecovery Signatures.
Export
This feature allows you to export OsRecovery Signatures to an available le system.
Update
Select Yes to load the DBT from the manufacturer's defaults. Select No to load the
DBT from a le.
Append
Select Yes to add the DBT from the manufacturer's defaults list to the existing DBT.
Select No to load the DBT from a le.
Delete
Select Yes to delete the variable. Select No to delete only a certicate from the key
database.
Security
Security
Hard Drive Security Frozen
Use this feature to enable BIOS security frozen command to SATA and NVME devices.
The options are Enabled and Disabled.
Password Check
Select Setup for the system to check for a password at Setup. Select Always for the system
to check for a password at boot up or upon entering the BIOS Setup utility. The options
are Setup and Always.
Administrator Password
Press <Enter> to create a new, or change an existing Administrator password.
*If the password has been created, the feature of User Password below will become
available for conguration.
User Password
Press <Enter> to create a new, or change an existing, Administrator password.