Chapter 4: UEFI BIOS
123
Trusted Computing
Note: This feature is appeared and available for conguration when a TPM 2.0 device
is installed.
Trusted Computing
The following information will be displayed:
TPM 2.0 Device Found
• Firmware Version
• Vendor
Security Device Support
This feature enables BIOS support for security devices. The options are Disabled and
Enabled.
*If this feature above is set to Enabled and you click Save & Exit to apply the set-
ting, the following features will become available for conguration:
• Active PCR Banks
• Available PCR banks
SHA256 PCR Bank
This feature enables SHA256 PCR Bank. The options are Disabled and Enabled.
SHA384 PCR Bank
This feature enables SHA384 PCR Bank. The options are Disabled and Enabled.
SM3_256 PCR Bank
This feature enables SM3_256 PCR Bank. The options are Disabled and Enabled.
Pending operation
This feature schedules an operation for the security device. Changing this setting will
reboot the system. The options are None and TPM Clear.
Note: This feature is available for conguring when the TPM State is set to Enabled.
Platform Hierarchy
This feature enables Platform Hierarchy. The options are Disabled and Enabled.