57
Chapter 2: Installation
Clear CMOS/SW1 Button
Clear CMOS Button is used to clear the saved system setup conguration stored in the CMOS
chip. All the settings will be erased and restored to the factory defaults after pressing this
button. On this motherboard, there are two buttons which built-in this function. One is the
SW1 button located on the I/O back panel and the other is the Clear CMOS button located
next to the Reset Button.
Power Button
In addition to the soft power switch provided in JF1, your motherboard is equipped with a
'soft' power button on the motherboard. This switch works the same way as the soft power
switch on JF1.
Reset Button
When pressed, the Reset Button will reset the system and reboot. This action will erase
everything in memory and restart the system.
1. Clear CMOS
2. SW1
3. Power Button
4. Reset Button
C9Z790-CGW
DESIGNED IN USA
REV:1.00
MAC CODEMAC CODE BAR CODE
BIOS
LICENSE
PCH
JLED_POGO2
JLED_POGO1
JRLED2
JRLED1
JTPM1
JLED_IO
SW1
JSTBY1
JD1
JSD1
JPW1
LED4801
LED18
LED17
LED1
LED3
LED2
JPW2
JL1
LED4
JPME2
JLED1
SYS_FAN1
SYS_FAN2
JWD1
22110
22110
2260
2280
PCH SLOT1 PCIe 3.0 X1
USB12 (3.2, 20Gb)
USB7 (3.2, 20Gb)
USB6 (3.2, 10Gb)
M.2-C1
12V_PUMP_PWR1
USB9 (3.2, 20Gb)
USB8 (3.2, 10Gb)
2280
SP1
B1
2260
2260
2280
BOOT LED
VGA LED
DIMM LED
CPU LED
DP/HDMI
LAN2
LAN1
JF1
AUDIO FP
COM1
USB4/5
USB10/11
(3.2, 5Gb)
M.2-P1
PCH SLOT5
PCIe
3.0 X1
CPU SLOT4
PCIe
5.0 X8 (IN X16)
CPU SLOT7
PCIe
5.0 X16
M.2-P2
SYS_FAN3
HD AUDIO
USB0/1/2/3
POWER
BUTTON
DIMMB1
DIMMB2
DIMMA1
DIMMA2
RESET
BUTTON
CPU_FAN1 CLEAR CMOS
CPU_FAN2
I-SATA4
I-SATA5
I-SATA2
I-SATA3
I-SATA0
I-SATA1
M.2-E1 (CNVi)
3 4
1
2
To Next Page
Loading...
