60
Super C9Z790-CG/-CGW User's Manual
1. LED2 (M.2-P2)
2. LED3 (M.2-P1)
3. LED4801 (M.2-C1)
4. BIOS POST Code LED
C9Z790-CGW
DESIGNED IN USA
REV:1.00
MAC CODEMAC CODE BAR CODE
BIOS
LICENSE
PCH
JLED_POGO2
JLED_POGO1
JRLED2
JRLED1
JTPM1
JLED_IO
SW1
JSTBY1
JD1
JSD1
JPW1
LED4801
LED18
LED17
LED1
LED3
LED2
JPW2
JL1
LED4
JPME2
JLED1
SYS_FAN1
SYS_FAN2
JWD1
22110
22110
2260
2280
PCH SLOT1 PCIe 3.0 X1
USB12 (3.2, 20Gb)
USB7 (3.2, 20Gb)
USB6 (3.2, 10Gb)
M.2-C1
12V_PUMP_PWR1
USB9 (3.2, 20Gb)
USB8 (3.2, 10Gb)
2280
SP1
B1
2260
2260
2280
BOOT LED
VGA LED
DIMM LED
CPU LED
DP/HDMI
LAN2
LAN1
JF1
AUDIO FP
COM1
USB4/5
USB10/11
(3.2, 5Gb)
M.2-P1
PCH SLOT5
PCIe
3.0 X1
CPU SLOT4
PCIe
5.0 X8 (IN X16)
CPU SLOT7
PCIe
5.0 X16
M.2-P2
SYS_FAN3
HD AUDIO
USB0/1/2/3
POWER
BUTTON
DIMMB1
DIMMB2
DIMMA1
DIMMA2
RESET
BUTTON
CPU_FAN1 CLEAR CMOS
CPU_FAN2
I-SATA4
I-SATA5
I-SATA2
I-SATA3
I-SATA0
I-SATA1
M.2-E1 (CNVi)
4
3
2
1
M.2 LED
Three M.2 LEDs are provided and indicated the status of connected M.2 devices. When an M.2
LED is blinking, the corresponding M.2 device is functioning normally. These LEDs are located
nearby the corresponding M.2 sockets. Refer to the table below for the status information.
M.2 LED State
LED Color Denition
Green: On Device detected
Green: Blinking Device Working
BIOS POST Code LED
LED4 is made up of two alpha-numeric displays that will display a status or
BIOS POST code, when the motherboard is powered on. For more information,
refer to https://www.supermicro.com/manuals/other/AMI_AptioV_BIOS_POST_
Codes_for_SM_Motherboards.pdf.
To Next Page
Loading...
