Super C9Z790-CG/-CGW User's Manual
70
The AMI BIOS GUI Setup Utility uses a mouse pointer navigation system similar to standard
graphical user interfaces. Hover and click an icon to select a section, click a down arrow to
select from an options list.
You may press the <F1> on any screen under the Setup Section to see a list of Hot Keys
that are available. Press <F12> to print the screen.
The keyboard's Escape key <ESC> cancels the current screen and will return you back to
the previous screen.
Note: For AMI BIOS Recovery, please refer to the UEFI BIOS Recovery Instructions
in Appendix D.
Changing Between EZ Mode and Advanced Mode
To change between EZ Mode and Advanced Mode, hit F7 on the keyboard. When in EZ
Mode (refer to Section 4.2), select feature options and an overview of hardware status are
displayed. When in Advanced Mode (from Section 4.3 to 4.8), all following conguration menus
and their contents become available.
To Next Page
Loading...
