Supermicro C9Z790-CG - Page 89

Chapter 4: UEFI BIOS
89
tRFC2
This feature congures the Minimum Refrech Recovery Delay Time. Enter a value be-
tween 0-15000 and the default is 0 for Auto.
tRTP
This feature congures the Minimum Internal Read to Precharge Command Delay Time.
Enter a value between 0-15 where 0 is for Auto. The default is Auto.
tCCD_L
Enter a value for desired tCCD_L. The default is Auto.
tWR
This feature congures the Minimum Write Recovery Time. Enter a value between 0-2
where 0 is for Auto. The default is Auto.
NMode
This feature congures the System Command Rate. Enter a value between 0-2 where
0 is for Auto. The default is Auto.
tRRD_sg / tRRD_dg / tRDRD_sg / tRDRD_dg / tRDRD_dr / tRDRD_dd / tRDWR_
sg / tRDWR_dg / tRDWR_dr / tRDWR_dd / tWRRD_sg / tWRRD_dg / tWRRD_dr /
tWRRD_dd / tWRWR_sg / tWRWR_dg / tWRWR_dr / tWRWR_dd / tCKE / tCSH /
tCSL / tCAS2CS / tXSDLL / tMOD
Enter a value for these features. The default is Auto.
RTTWr
Select a value for RttWr. The options are Auto, 0, 34, 40, 48, 60, 80, 120, and 240.
RttNomRd / RttNomWr
Enter a value for RttNomRd / RttNomWr. The options are Auto, 0, 34, 40, 48, 60, 80,
120, and 240.
RttPark / RttParkDqs
Enter a value for RttPark / RttParkDqs. The options are Auto, 0, 34, 40, 48, 60, 80, 120,
and 240.
RcompTarget [RdOdt] / RcompTarget [WrDS] / RcomeTarget [WrDSCtl] /
RcomeTarget [WrDSClk]
Enter a value for these features. The default is Auto.