H13SAE-MF QUICK REFERENCE GUIDE
1. After the processor is secured, now you must
install the heatsink to the socket frame. Lower
the heatsink down until the four screws on the
heatsink align with the four screw holes on
the socket frame.
2. Using a diagonal pattern, tighten the four
screws down on the heatsink in the sequence
1-2-3-4 till it is secured. The heatsink will now
be secured and you have nished installing
the processor and heatsink onto the moth-
erboard. When nished, the heatsink will be
secured over the socket and processor.
4. Connect cooling fan connector to the fan
header labeled for CPU on the motherboard.
Heatsink Installation
Heatsink Installation
3. Install the heatsink cooling fan and holder as-
sembly on the heatsink body and then tighten
the single locking screw on top of the fan
holder.
To Next Page
Loading...
