H13SAE-MF QUICK REFERENCE GUIDE
Notes:
• It is strongly recommended that you install a heatsink on the M.2 device or use a M.2 device
with a built-in heatsink.
• Be sure to install the M.2 device(s) prior to placing the motherboard into a chassis.
This motherboard has four M.2 M-key sockets that support the 2280 and 22110 M.2 devices.
One stando and a screw are pre-installed into the position of each 22110 mounting hole.
Refer to the illustration below for the locations of M.2 sockets and mounting holes. Follow
the steps on the next two pages to install the M.2 device.
H13SAE-MF
MAC CODE
REV:1.00
DESIGNED IN USA
BIOS LICENSE
BAR CODE
IPMI CODE
C A
A
C
A
C
A
1 2 3
1 2 3
CPU SLOT6 PCIe 5.0 X16
PCH SLOT7 PCIe 4.0 X4
CPU SLOT4 PCIe 5.0 X8 (IN X16)
1-2:ENABLE
JPG1:VGA
2-3:DISABLE
JWD1:WATCH DOG
1-2:RST
2-3:NMI
CHASSIS INTRUSION
22110
22110
2280
2280
M.2 Device Installation
M.2 Device Installation
To Next Page
Loading...
