5-3
Chapter 5: BIOS
While the BIOS is in control, the Setup program can be activated in one of two ways:
1. By pressing <DELETE> immediately after turning the system on, or
2. When the message Press the <Delete> key to enter Setup appears briefly at the
bottom of the screen during the POST, press the <D
ELETE> key to activate the main
S
ETUP menu:
5-4 Main BIOS Setup
All Main Setup options are described in this section. Use the UP/DOWN arrow keys to
move among the different settings in each menu. Use the L
EFT/RIGHT arrow keys to
change the options for each setting. Press the <E
SC> key to exit the CMOS SETUP
menu. The next section describes in detail how to navigate through the menus. Items
that use sub-menus are indicated with the
icon. With the item highlighted, press the
<E
NTER> key to access the sub-menu.
Menu options found in the MAIN BIOS SETUP menu are described in Table 5-1.
Figure 5-1. BIOS Setup Screen
To Next Page
Loading...
