MBI-6219G-T7LX /MBI-6119G-T7LX MicroBlade Module User’s Manual
5-18
5-7 IPMI Setup
Table 5-16. IPMI Menu
Menu Option Description
IPMI Information This item indicates the IPMI firmware revision used in your system.
System Event Log
Use this sub-menu to configure the System Event Log.
NOTE: All values changed here in this sub-menu do not take effect until the
computer is restarted.
SEL Components
Use this setting to Enable or Disable all features of the System Event Logging
during boot.
Erase SEL
Use this setting to choose options for erasing SEL. Options include No, Yes on
Next Reset and Yes on Every Reset
When SEL is Full
Use this setting to choose what reactions to use when SEL is full. Options
include Do Nothing and Erase Immediately.
Log EFI Status Codes
Use this setting to disable the logging of EFI Status Codes or log only error
codes or other progress codes or both. Options include Disabled, Both, Error
Code and Progress Code.
BMC Network
Configuration
Use this sub-menu to configure BMC network parameters.
Update IPMI LAN
Configuration
This setting updates the IPMI LAN Configuration. BIOS will be set to the other
settings specified and changed in this screen to the IPMI on the next boot.
Options include No or Yes.
Configuration
Address Source
This feature allows the user to select the source of the IP address for this
computer. If Static is selected, you will need to know the IP address of this
computer and enter it to the system manually in the field. If DHCP is selected,
the BIOS will search for a DHCP (Dynamic Host Configuration Protocol) server
in the network that is attached to and request the next available IP address for
this computer. Options include Static or DHCP. The following items are assigned
IP addresses automatically if DHCP is selected.
Station IP Address
This item displays the Station IP address for this computer. This should be in
decimal and in dotted quad form (i.e., 192.168.10.253).
Subnet Mask
This item displays the sub-network that this computer belongs to. The value of
each three-digit number separated by dots should not exceed 255.
Station MAC Address
This item displays the Station MAC address for this computer. Mac addresses
are 6 two-digit hexadecimal numbers.
Router IP Address
This item displays the Router IP address for this computer. This should be in
decimal and in dotted quad form (i.e., 192.168.10.253).
Router MAC Address
This item displays the Router MAC address for this computer. Mac addresses
are 6 two-digit hexadecimal numbers.
To Next Page
Loading...
