Supermicro Supero X7DCA-L - High Definition Audio

Chapter 2: Installation
2-21
F A N 4
Buttery
JD1
USB6
JWD1
JPL2
JPL1
JI2C1
JWOR1
JSMB1
CD1
J139
JWOL1
Mini PWR LED
LED6
JBT1
CPU2
J7
F A N 1
F A N 6
Floppy
FAN5
USB4/5
PWR I2C
KB/MS
USB0/1/2/3
COM1
VGA
LAN1/2
HD Audio
Slot5 PCI-E x4 (in x8 slot)
Slot4 PCI-E x8(in x8 slot)
Slot3 PCI 33MHz
COM2
S I/O
BIOS
Slot6 PCI-E x16
JI2C2
F A N 3
CPU1
LED5
Intel 5100
North Bridge
Intel ICH9R
South Bridge
LAN
CTRL
LAN
CTRL
Video
CTRL
Audio
CTRL
Buzzer
F A N 2
JPW2
JPW1
DIMM1B
DIMM1A
DIMM2B
DIMM2A
DIMM3B
DIMM3A
X7DCA-L
LED7
JF1
J8
USB7
JPG1
JL1
S A T A 0
S A T A 1
S A T A 2
S A T A 3
S A T A 4
S A T A 5
HighDenitionAudio(HDA)
This motherboard features a 7.1+2 Channel
High Definition Audio (HDA) codec that
provides 10 DAC channels, simultaneously
supporting 7.1 sound playback, and two
channels of independent stereo sound output
(multiple streaming) through the front panel
stereo out for the front L&R, rear L&R, center
and subwoofer speakers. Use the Advanced
software included in the CD-ROM that came
with your motherboard to enable HD Audio.
Once enabled, sound is then output through
the Line In, Line Out and MIC jacks (See at
the picture at right.)
CD1
PinDenitions
Pin# Denition
1 Left Stereo Signal
2 Ground
3 Ground
4 Right Stereo Signal
Grey: Side
Surround
Black: Back
Surround
Orange:
CEN/LFE
Pink: Mic-In
Green:Front
Blue: Line-In
CD and Auxiliary (FP) Audio Headers
A 4-pin CD header is located at CD1, and
an Auxiliary Front Panel header* is located
at J139 on the motherboard. These headers
allow you to use the onboard sound for audio
CD playback. Connect an audio cable from
your CD drive to the header that ts your
cable's connector. Only one CD header can
be used at any one time. See the tables at
right for pin denitions. (Auxiliary Audio: see
the next item.)
A
A. H.D Audio
B. CD1
B