Supermicro Supero X9DRi-LN4F+ - Onboard Power LED; Rear UID LED

Chapter 2: Installation
2-39
Onboard Power LED
An Onboard Power LED is located at LE1
on the motherboard. When this LED is on,
the system is on. Be sure to turn off the
system and unplug the power cord before
removing or installing components. See
the tables at right for more information.
Onboard PWR LED Indicator (LE1)
LED Settings
LED Color Status
Off System Off (PWR cable
not connected)
Green System On
Green:
Flashing
Quickly
ACPI S1 State
A. PWR LED
B. Rear UID LED
JRK1
JF1
JPI2C1
JPW3
JPW2
JPW1
JSD1
SP1
J18
J17
JBAT1
JP6
JP7
JI2C2
JI2C1
JL1
JOH1
FANB
FANA
FAN4
FAN3
FAN2
FAN6
FAN1
SW1
J21
JBT1
LEM1
JWP1
JPG1
JWD1
JPL1
USB4/5
JTPM1
XDP-PCH
BIOS BOX
SAS0~3
SAS4~7
I-SATA0
I-SATA1
P2 DIMMF3
P2 DIMMF1
P2 DIMMF2 P2 DIMME3 P2 DIMME2
P2 DIMME1
P2 DIMMG1
P2 DIMMH1
P2 DIMMG3
P2 DIMMG2
P2 DIMMH2 P2 DIMMH3
COM1
USB6/7
UID
IPMI_LAN
Alaways populate DIMMx1 first
P1 DIMMA2
P1 DIMMA1
P1 DIMMB3 P1 DIMMB2
P1 DIMMB1
P1 DIMMA3
P1 DIMMC1
P1 DIMMC2 P1 DIMMC3 P1 DIMMD1
P1 DIMMD2
P1 DIMMD3
I-SATA5
I-SATA4
I-SATA3
I-SATA2
LAN2/4
VGA
XDP-CPU
COM2
BMC CTRL
LAN1/3
USB 0/1
JPME2
PHY
FAN5
BIOS
LAN CTRL
PCH
LE1
X9DR3-LN4F+/X9DRi-LN4F+
Alaways populate DIMMx1 first
USB9
SAS CTRL
USB 2/3
JSTBY1
IPMB
1
1
JD1
JF2
LE2
JPB1
JBMC1
Rev. 1.10
JPME1
CPU1
CPU2
CPU1 Slot1 PCI-E 3.0 x16
CPU1 Slot2 PCI-E 3.0 x4 (in X8 slot)
CPU2 Slot6 PCI-E 3.0 x8
CPU2 Slot5 PCI-E 3.0 x16
CPU2 Slot4 PCI-E 3.0 x16
CPU1 Slot3 PCI-E 3.0 x16
A
B
Rear UID LED
The rear UID LED is located at LE2 on
the rear of the motherboard. This LED
is used in conjunction with the rear UID
switch to provide easy identication of a
system that might be in need of service.
Refer to UID Switch on Page 2-17 for
more information.
UID LED
Status
Color/State Status
Blue Unit Identied