Supermicro SuperServer 5019A-12TN4 - Page 113

Appendix D: UEFI BIOS Recovery
113
Note: On the other hand, if the following screen displays, please load the "Super.ROM" le
to the root folder and connect this folder to the system. (You can do so by inserting a USB
device that contains the new "Super.ROM" image to your machine for BIOS recovery.)
minutes to locate the SUPER.ROM le if the media size becomes too large because it contains
too many folders and les.
To perform UEFI BIOS recovery using a USB-attached device, follow the instructions below.
1. Using a di󰀨erent system, copy the "Super.ROM" binary image le into the disc Root "\"
Directory of a USB device or a writeable CD/DVD.
Note: If you cannot locate the "Super.ROM" le in your driver disk, visit our website at www.
supermicro.com to download the BIOS image into a USB ash device and rename it "Super.
ROM".
2. Insert the USB device that contains the new BIOS image ("Super.ROM") into your USB
drive and power on the system.
3. While powering on the system, please keep pressing <Ctrl> and <Home> simultaneously
on your keyboard until the following screen (or a screen similar to the one below)
displays.
4. After locating the new BIOS binary image, the system will enter the BIOS Recovery
menu as shown below.