31
Chapter 3: Maintenance and Component Installation
Two 3.5" Hard Drives
and No Expansion Card
Hard Drive Carrier Indicators
Each hard drive carrier has two LED indicators: an activity indicator and a status indicator. In
RAID congurations, the status indicator lights to indicate the status of the drive. In non-RAID
congurations, the status indicator remains o. See the table below for details.
Hard Drive Carrier LED Indicators
LED State/Condition Indication
Green Blinking Indicates drive activity
Red Solid on Drive failure
Note: Enterprise level hard disk drives are recommended for use in Supermicro chassis and
servers. For information on recommended HDDs, visit the Supermicro website at http://www.
supermicro.com/products/nfo/les/storage/SBB-HDDCompList.pdf
To Next Page
Loading...
