Need help?Do you have a question about the Supermicro SuperServer 5019A-12TN4 and is the answer not in the manual?
General| Form Factor | 1U Rackmount |
|---|---|
| Memory Slots | 4 |
| Memory Type | DDR4 ECC |
| Storage | 12x 3.5" hot-swap drive bays |
| SATA | 6Gb/s |
| M.2 | 1 x M.2 (PCIe 3.0 x4 or SATA) |
| Expansion Slots | 1 x PCI-E 3.0 x8 (in x16 slot) |
| Video | Aspeed AST2500 |
| Power Supply | Redundant |
| Management | IPMI 2.0 with KVM-over-IP |
| Operating System Support | Windows Server, Linux |
Explains the warning symbols used throughout the manual for safety.
Step-by-step instructions for installing the server chassis into a standard rack.
Instructions for installing the server chassis into a Telco style two-post rack without rails.
Procedure to ensure power is safely removed from the system before maintenance.
Details on installing memory, motherboard battery, and expansion cards.
Information on front bezel, hard drives, cooling, and power supply replacement.
Details on the main ATX power supply, 12V DC, and 4-pin HDD power connectors.
Description of fan headers, speaker, general purpose I/O, TPM, DOM, and chassis intrusion headers.
Information on front control panel ports, rear I/O ports, VGA, and LAN ports.
Explanation of jumpers, including CMOS clear, VGA/LAN enable/disable, watch dog, and BIOS recovery.
Instructions for installing Windows OS on RAID and non-RAID systems.
Guide to downloading and installing system drivers and utilities from the FTP site.
Details on various advanced BIOS settings, including boot features, power configuration, and CPU settings.
Instructions for recovering the BIOS using a USB flash drive or CD/DVD.
To Next Page