SuperServer 5019A-12TN4 User's Manual
34
4. Remove the failed power supply from the chassis.
5. Align the mounting thru holes on the new power supply with the mounting holes in the
chassis and re-attach the new power supply to the chassis using the four screws which
were previously set aside.
6. Reconnect the wiring and the power cord to the power supply, replace the cover and
power up the server.
Power Supply
Mounting Thru Holes
Rear Mounting
Screws
Insert Bottom
Mounting Screws
from Underside
Figure 3-9. Installing the Power Supply
To Next Page
Loading...
