Supermicro SuperServer 5019A-12TN4 - Page 57

Chapter 6: BIOS
57
• L1 Cache RAM
• L2 Cache RAM
EIST (GV3)
EIST (Enhanced Intel SpeedStep Technology) allows the system to automatically adjust
processor voltage and core frequency to reduce power consumption and heat dissipation.
The options are Disable and Enable.
BIOS Request Frequency
Use this feature to instruct how much frequency will be delivered to the processor. The options
are Disable and Enable.
Turbo
Select Enable for processor cores to run faster than the frequency specied by the
manufacturer. The options are Disable and Enable.
TM1
Select Enable to activate TM1 support for system thermal monitoring. TM1 allows the CPU to
regulate its power consumption based upon the modulation of the CPU Internal clock when
the CPU temperature reaches a pre-dened overheating threshold. The options are Disable
and Enable.
TM2 Mode
Use this feature to select the throttling mode for TM2. The options are LFM Throttling and
Adaptive Throttling.
Dynamic Self Refresh
Select Enable to support Dynamic Self-Refreshing for the onboard memory controller. The
options are Disable and Enable.
CPU C State
Select Eanbled to enhance the Cx state of the CPU. Reboot the system for this feature to
take e󰀨ect. The options are Disable and Enable.
*If the feature above is enabled, the following four features are available for
conguration:
Package C State limit
Use this item to set the limit on the C-State package register. The options are No Pkg C-State,
C1, and C3.
Max Core C-State
Use this feature to specify which idle power saving state to enter. The options are C1 and C6.