Supermicro SuperServer 5019A-12TN4 - Page 66

SuperServer 5019A-12TN4 User's Manual
66
Maximum Read Request
Select Auto for the system BIOS to automatically set the maximum size for a read request
for a PCI-E device to enhance system performance. The options are Auto, 128 Bytes, 256
Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes, and 4096 Bytes.
ASPM Support
Use this feature to set the Active State Power Management (ASPM) level for a PCI-E device.
Select Auto for the system BIOS to automatically set the ASPM level based on the system
conguration. Select Disabled to disable ASPM support. The options are Disabled, Auto,
and Force L0s.
Warning: Enabling ASPM support may cause some PCI-E devices to fail!
ARI Forwarding
When this feature is enable, the Downstream port disables its traditional device number to 0
when turning Type1 Conguration Request into a Type0 Conguration Request. The default
is Disabled.
CPU SLOT7 PCI-E 3.0 X4 OPROM
Use this feature to select the rmware type for the add-on card for this slot. The options are
Disabled, Legacy, and EFI.
M.2 PCI-E 3.0 X4 OPROM
Use this feature to select the rmware type for the add-on card for this slot. The options are
Disabled, Legacy, and EFI.
Mini PCI-E OPROM
Use this feature to select which rmware type to load for the add-on card for this slot. The
options are Disabled, Legacy, and EFI.
Onboard LAN OPROM Type
Use this feature to select the Onboard LAN Option ROM type. The options are Disabled,
Legacy, and EFI.
Onboard Video OPROM
Use this feature to select the Onboard Video Option ROM type. The options are Disabled,
Legacy, and EFI.
VGA Priority
Use this feature to select the type of video display. The options are Onboard and O󰀨board.