Supermicro SUPERSERVER 5019S-MT - Chapter 1 Introduction; Overview; Unpacking the System; System Specifications

98
SuperServer 5019S-MT User's Manual Chapter 1: Introduction
Chapter 1
Introduction
1.1 Overview
This chapter provides a brief outline of the functions and features of the 5019S-MT. The
5019S-MT is based on the X11SSH-TF motherboard and the SC813MFTQC-350CB chassis.
In additon to the motherboard and chassis, several important parts that are included with the
system are listed below.
1.2 Unpacking the System
Inspect the box the SuperServer 5019S-MT was shipped in and note if it was damaged in
any way. If any equipment appears damaged, please le a damage claim with the carrier
who delivered it.
Decide on a suitable location for the rack unit that will hold the server. It should be situated
in a clean, dust-free area that is well ventilated. Avoid areas where heat, electrical noise and
electromagnetic elds are generated. It will also require a grounded AC power outlet nearby.
Be sure to read the precautions and considerations noted in Appendix B.
Main Parts List
Description Part Number Quantity
Air Shroud MCP-310-19007-0N 1
Heatsink (passive) SNK-P0046P 1
SATA/SAS Backplane BPN-SAS3-815TQ 1
Hard Drive Carriers MCP-220-00075-0B 4
Cooling Fans (4-cm) FAN-0147L4 4
Riser Card RSC-RR1U-E8
Outer Rack Rails MCP-290-00102-0N 1 set
Inner Rack Rails MCP-290-00108-0N
Inner Rack Rail Extensions MCP-290-00110-0N 1
1.3SystemSpecications
The following table provides you with an overview of the main features and specications of
the 5019S-MT. Please refer to Appendix C for additional specications.
SystemSpecications
Motherboard
X11SSH-TF
Chassis
SC813MFTQC-350CB
CPU
Intel
®
6th Gen Core 3, Xeon E3-1200 v5, Pentium and Celeron processors
Socket Type
LGA 1151 (H4)
Memory
Four DIMM slots to support up to 64 GB of 72-bit ECC unbuffered (UDIMM) DDR4-2133/1866/1066 MHz
SDRAM
Chipset
C236 chipset
Expansion Slots
One PCI Express 3.0 x2 in x4 slot
One PCI Express 3.0 x8
One M.2 slot (CPU Slot 7)
Hard Drives
Four hot-swap SATA hard drives
Power
Single 350W power supply
Form Factor
Mini 1U rackmount
Dimensions
(WxHxD) 17.2 x 1.7 x 19.85 in. (437 x 43 x 504 mm)