5-13
Chapter 5 Advanced Chassis Setup and Maintenance
Figure 5-15. Installing the Expansion Card
4. Remove the screw securing the PCI slot cover over the PCI slot in the rear of
the tray and set it aside for later use.
5. Slide the PCI slot cover up and out of the PCI slot.
6. Insert the card into its slot on the motherboard while aligning its bracket into the
slot on the chassis drawer.
7. Secure the bracket of the expansion card with the screw previously set aside.
8. Slide the rear tray into the chassis and secure it with the screws.
9. Replace the chassis cover and power up the system.
5
6
To Next Page
Loading...
