Supermicro SUPERSERVER 5028D-TN4T - Chipset Configuration; North Bridge; Iio Configuration

Chapter 6: AMI BIOS
7-11
Program PowerCTL_MSR
PKG C-state Lat. Neg.
Use this feature to indicate whether latency should be negotiated with PCH
for packaging C-States. The options are Enable and Disable.
SAPM Control
This feature indicates whether the PCU should control the System Agent
PM using its power-performance tuning algorithm. The options are Enable
and Disable.
Energy Efcient Turbo
Use this feature to enable energy efcient turbo mode. The options are
Enable and Disable.
DRAM RAPL Conguration
DRAM RAPL Extended Range
Use this feature to set the DRAM Running Average Power Limit (RAPL)
Extended Range. The options are Disable and Enable.

Chipset Conguration
Warning: Setting the wrong values in the following features may cause the system
to malfunction.
North Bridge
This feature allows the user to congure the following North Bridge settings.
IIO Conguration
EV DFX (Device Function On-Hide) Features
When this feature is set to Enable, the EV_DFX Lock Bits that are located on
a processor will always remain clear during electric tuning. The options are
Disable and Enable.