Supermicro SUPERSERVER 5028D-TN4T - Cpu Configuration

7-6
SUPERSERVER 5028D-TN4T User’s Manual

CPU Conguration
The following CPU information will be displayed:
• Processor ID
• Processor Frequency
• Processor Max Ratio
• Processor Min Ratio
• Microcode Revision
• L1 Cache RAM
• L2 Cache RAM
• L3 Cache Ram
• CPU Version
Clock Spread Spectrum
If this feature is set to Enabled, the BIOS utility will monitor the level of
Electromagnetic Interference caused by the components and will attempt to reduce
the interference whenever needed. The options are Enabled and Disabled.
Hyper-Threading (ALL)
Select Enable to use Intel Hyper-Threading Technology to enhance CPU
performance. The options are Enable and Disable.
Cores Enabled
Set a numeric value to enable the number of cores. (Please refer to Intel's website
for more information.) Enter 0 to enable all cores.
Monitor/Mwait
Select Enabled to enable the Monitor/MWait instructions. The Monitor instruction
monitors a region of memory for writes, and MWait instructions instruct the CPU to
stop until the monitored region begins to write. The options are Enable and Disable.