EasyManua.ls Logo

Supermicro SUPERSERVER 5028D-TN4T - Page 95

Supermicro SUPERSERVER 5028D-TN4T
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 6: AMI BIOS
7-17
Server ME (Management Engine) Conguration
This feature displays the following system ME conguration settings.
General ME Conguration
Operational Firmware Version
ME Firmware Type
Recovery Firmware Version
ME Firmware Features
ME Firmware Status #1
ME Firmware Status #2
Current State
Error Code
PCIe/PCI/PnP Conguration
The following information will display:
PCI Bus Driver Version
PCI Devices Common Settings:
PCI PERR/SERR Support
Select Enabled to allow a PCI device to generate a PERR/SERR number for a PCI
Bus Signal Error Event. The options are Enabled and Disabled.
SR-IOV (Available if the system supports Single-Root Virtualization)
Select Enabled for Single-Root IO Virtualization support. The options are Enabled
and Disabled.
Maximum Payload
Use this feature to select the setting for the PCI Express maximum payload size.
The options are Auto, 128 Bytes, 256 Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes,
and 4096 Bytes.
Relaxed Ordering
Select Enable to enable Relaxed Ordering support which will allow certain
transactions to violate the strict-ordering rules of PCI bus for a transaction to be
completed prior to other transactions that have already been enqueued. The options
are Disable and Enable.

Table of Contents

Related product manuals