Supermicro SUPERSERVER 6029BT-HNC0R - Appendix C System Specifications

Appendix C: System Specications
127
Appendix C
System Specications
Processors (per node)
Dual Intel Xeon 82xx/62xx/52xx/42xx/32xx or 81xx/61xx/51xx/41xx/31xx processors in a P (LGA3647) socket type
Note: 
Chipset
Intel C621
BIOS
AMI 32Mb SPI Flash ROM
Memory (per node)
Twenty four DIMM slots supporting up to 6 TB of memory with DDR4 2933 MT/s ECC Load Reduced DIMMs (LRDIMM) and
Registered DIMMs (RDIMM); also supports Non-Volatile DIMM (NV-DIMM) and Intel Optane DC Persistent Memory (DCPMM)
Note: See the Supermicro website for current supported memory.
SAS Controller
SAS3 (12Gbps) via Broadcom 3008; IT mode
Drive Bays
Twelve hot-swap 3.5" drives total; each node controls three NVMe/SAS drives
Two M.2 SSD cards (per node)
PCI Expansion Slots (per node)
Two PCIe 3.0 x16 slots
One SIOM card support (must bundle with network card)
Motherboard
X11DPT-B; proprietary form factor (7.4 x 18.9 in. / 188 x 479 mm.)
Chassis
SC827BHQ+-R2K22BP; four hot-swap computing nodes
2U Rackmount, 17.6 x 3.5 x 30.1 in. / 447 x 88 x 764 mm. (W x H x D)
Weight
Gross weight: 85 lbs. (38.6 kg)
Net weight: 54.5 lbs. (24.7 kg)
System Cooling
Four 8-cm PWM fans; two CPU heatsinks per node; one air shroud per node
Power Supply
Model: PWS-2K22A-1R, 80 Plus Titanium level
Rated Output Power: 1200W/1800W/1980W/2090/2200W
Rated AC Input Voltages: Output Power, +12 V Output Current
100-127 Vac: 1200 W, 100 A
220-220 Vac: 1800 W, 150 A
220-230 Vac: 1980 W, 165 A
230-240 Vac: 2090 W, 174 A
180-220 Vac (UL/cUL only): 2090 W, 174 A
220-240 Vac (UL/cUL only): 2200 W, 183 A
230-240 Vac (CCC only): 2200 W, 174 A
Rated Input Frequency: 50-60 Hz
12 V standby: 2.1 A max