Chapter 2: Server Installation
21
2.3 Rack Mounting Instructions
This section provides information on installing the chassis into a rack unit with the rails
provided. There are a variety of rack units on the market, which may mean that the assembly
installation instructions that came with the rack unit you are using. Note:
rack between 28" and 33.5" deep.
Overview of the Rack Rails
side of the chassis, and so marked. Each rail consists of two sections: a front section which
to the rear post of the rack.
Figure 2-1. Rackmount Rail
(Right rail assembly shown)
Adjusting the Rail Length
rack.
Rear Section
Adjusting Screw
Front Section
To Next Page
Loading...
