Supermicro SUPERSERVER 6029BT-HNC0R - Page 138

138
SuperServer 6029BT-HNC0R User's Manual
F.2 Enabling NVMe RAID
RAID for NVMe SSDs must be enabled through the UEFI BIOS.
1. Install the patch as described in the Restrictions and Requirements section on a
previous page.
2. Reboot the server.
3. Press [DEL] key to enter BIOS.
4. Switch to Advanced > Chipset Conguration > North Bridge > IIO Conguration >
Intel VMD Technology > Intel VMD for Volume Management on CPU2.
5. Enable the VMD.
Figure F-2. BIOS VMD Settings
6. 
7. Press [DEL] to enter BIOS.
8. Switch to Advanced > Intel® Virtual RAID on CPU > All Intel VMD Controllers >
Create RAID Volume.
9. Set Name.
10. Set RAID Level.
For SYS-6029BT-HNC0R, enable VMD
     
sub-items under PStack0