47
Chapter 3: Maintenance and Component Installation
Screws for M.2 Carrier Card
Carrier Card Position
Figure 3-13. Locating the M.2 Carrier Card Slot and Screws
4. Power down the node and remove it from the chassis.
5. On the motherboard, remove any DIMMs obstructing access to the carrier card slot.
6. Push the carrier card into the slot on the motherboard. With the screws provided, secure
it to the side of the node chassis.
7. Replace any DIMMs that may have been removed.
8. Replace the node into the chassis, and power up the system.
Figure 3-12. Inserting the Stando Plug
To Next Page
Loading...
