Supermicro SUPERSERVER 6029BT-HNC0R - Page 59

59
Chapter 4: Motherboard Connections
VGA Enable/Disable
JPG1 allows you to enable or disable the VGA port using the onboard graphics controller.
The default setting is Enabled.
VGA Enable/Disable
Jumper Settings
Jumper
Setting
Denition
Pins 1-2 Enabled
Pins 2-3 Disabled
Management Engine (ME) Recovery
            
allocation for essential system operation only in order to maintain normal power operation
and management. In the single operation mode, online upgrade will be available via Recovery
mode.
ME Recovery Mode
Jumper Settings
Jumper
Setting
Denition
Pins 1-2 Normal
Pins 2-3 ME Recovery