EasyManua.ls Logo

Supermicro SuperServer E300-9A-4CN10P - Page 49

Supermicro SuperServer E300-9A-4CN10P
111 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
49
Chapter 5 BIOS
Lock PACKAGE_RAPL_LIMIT
Use this feature to lock the MSR 0x610 bit. The options are Disable and Enable.
*If the feature above is set to Disable, the next three features will be available for
conguration:
PL1 Time Window
              
miliseconds. The default setting is 45
PL1 Power Level (This feature is dependent on the CPU)

The default setting is 31
PL2 Power Level (This feature is dependent on the CPU)

The default setting is 37
Active Processor Cores
Use this feature to set the number of processor cores that will be activated for each CPU.
Select 0 to activate all processor cores.
Chipset Conguration
Warning: Setting the wrong values in the following sections may cause the system to malfunc-
tion.
North Bridge Conguration
North Bridge Conguration
Memory Information
MRC Version
Total Memory
Memory Frequency
VT-d
Select Enabled to enable Intel Virtualization Technology support for Direct I/O VT-d by
reporting the I/O device assignments to VMM through the DMAR ACPI Tables. This feature
󰀨
greater reliability, security and availability in networking and data-sharing. The options are
Disabled and Enabled.

Related product manuals