9
Chapter 1: Introduction
1
543
1.3 Chassis Features
The SCE300-LED+ is a compact embedded 1U chassis for Mini ITX and Flex ATX
motherboards.
Front Features
The front of the chassis includes the control panel.
Figure 1-1. Chassis Front and Control Panel
Control Panel Features
Item Features Description
1 Power button
The main power button applies or removes primary power from the power supply
to the server but maintains standby power. To perform most maintenance tasks,
unplug the system to remove all power.
2 Reset button Resets the system.
3 Information LED Alerts operator to several states, as noted in the table below.
4 HDD LED
5 Power LED
Indicates power is being supplied to the system power supply units. This LED is
illuminated when the system is operating normally.
2
Information LED
Status Description
Continuously on and red
An overheat condition has occurred.
(This may be caused by cable congestion.)
Blinking red (1Hz) Fan failure, check for an inoperative fan.
Blinking red (0.25Hz) Power failure, check for a non-operational power supply.
Solid blue UID has been activated locally to locate the server in a rack environment.
Blinking blue
UID has been activated using IPMI to locate the server in a rack
environment.
To Next Page
Loading...
