63
Chapter 5 BIOS
Pending operation
Use this item to schedule a TPM-related operation to be performed by a security device for
system data integrity. Your system will reboot to carry out a pending TPM operation. The
options are None and TPM Clear.
Note: Reboot the computer to change the state of the security device.
Device Select
Use this feature to select the TPM version. TPM 1.2 will restrict support to TPM 1.2 devices.
TPM 2.0 will restrict support for TPM 2.0 devices. Select Auto to enable support for both
versions. The default setting is Auto.
Current Status Information
This item displays the status of the TPM support on this motherboard.
• TPM Enabled Status
• TPM Active Status
• TPM Owner Status
*The features from here to Device Select on the next page are displayed if a TPM 2.0
module is detected:
TPM20 Device Found
Vendor: IFX
Firmware Version: 5.51
Conguration
Security Device Support
security devices will be enabled for TPM support to enhance data integrity and network
and Enable.
The following TPM information will be displayed:
• Active PCR banks
• Available PCR banks
*If the feature "Security Device Support" is set to Enable, the following features will
become available for conguration:
SHA-1 PCR Bank
the installed TPM device. The options are Disabled and Enabled.
To Next Page
Loading...
