SuperServer E300-9A User's Manual
54
Lock PACKAGE_RAPL_LIMIT
Use this feature to unlock the MSR 0x610. The options are Disable and Enable.
PL1 Time Window
milliseconds. The default setting is 45
PL1 Power Level
The default setting is 32
PL2 Power Level
The default setting is 38
Active Processor Cores
Use this feature to set the number of processor cores that will be activated for each CPU.
Select 0 to activate all processor cores.
Chipset Conguration
Warning: Setting the wrong values in the sections below may cause the system to malfunction.
North Bridge Conguration
The following memory information will be displayed:
• MRC Version
• Total Memory
• Memory Frequency
VT-d
Select Enabled to enable Intel Virtualization Technology support for Direct I/O VT-d by
reporting the I/O device assignments to VMM through the DMAR ACPI Tables. This feature
greater reliability, security and availability in networking and data-sharing. The options are
Disabled and Enabled.
VT-d Interrupt remapping
Use this feature to enable Interrupt Remapping support, which detects and controls external
interrupt requests. The options are Disabled and Enabled.
To Next Page
Loading...
