SuperServer E300-9A User's Manual
60
SR-IOV Support (Available if the system supports Single-Root Virtualization)
Select Enabled for Single-Root IO Virtualization support. SR-IOV is an extension of the PCI
Express interface and consists of two functions: physical functions (PF) and virtual functions
Enabled and Disabled.
Maximum Payload
Select Auto for the system BIOS to automatically set the maximum payload value for a PCI-E
device to enhance system performance. The options are Auto, 128 Bytes, 256 Bytes, 512
Bytes, 1024 Bytes, 2048 Bytes, and 4096 Bytes.
Maximum Read Request
Select Auto for the system BIOS to automatically set the maximum size for a read request
for a PCI-E device to enhance system performance. The options are Auto, 128 Bytes, 256
Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes, and 4096 Bytes.
ASPM Support
Use this feature to set the Active State Power Management (ASPM) level for a PCI-E device.
Select Auto for the system BIOS to automatically set the ASPM level based on the system
Disabled, Auto,
and Force L0s.
Warning: Enabling ASPM support may cause some PCI-E devices to fail!
ARI Forwarding
When this feature is enabled, the Downstream port disables its traditional device number to
is Disabled.
CPU SLOT7 PCI-E 3.0 X4 OPROM
Disabled, Legacy, and EFI.
M.2 PCI-E 3.0 X4 OPROM
Disabled, Legacy, and EFI.
Mini PCI-E OPROM
options are Disabled, Legacy, and EFI.
To Next Page
Loading...
