118
SuperServer E300-9D-4CN8TP/E300-9D-8CN8TP User's Manual
Note: On the other hand, if the following screen displays, please load the "Super.
inserting a USB device that contains the new "Super.ROM" image to your machine
for BIOS recovery.)
a bootable or non-bootable USB-attached device. However, the BIOS might need several
To perform UEFI BIOS recovery using a USB-attached device, follow the instructions below.
1.
Directory of a USB device or a writeable CD/DVD.
Note:
rename it "Super.ROM" for BIOS recovery use.
2. Insert the USB device that contains the new BIOS image ("Super.ROM") into your USB
drive and power on the system
3. While powering on the system, please keep pressing <Ctrl> and <Home> simultaneously
on your keyboard until the following screen (or a screen similar to the one below)
displays.
Warning: Please stop pressing the <Ctrl> and <Home> keys immediately when you see the
screen (or a similar screen) below; otherwise, it will trigger a system reboot.
To Next Page
Loading...
