50
SuperServer E50-9AP-N5 User's Manual
Device Settings
This item displays the base I/O port address and the Interrupt Request address of a serial
Change Settings
Port 1. Select Auto to allow the BIOS to automatically assign the base I/O and IRQ address
Auto, (IO=3F8h; IRQ=4), (IO=3F8h; IRQ=3, 4,
5, 6, 7, 9, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12), (IO=3E8h; IRQ=3, 4, 5,
6, 7, 9, 10, 11, 12), and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12).
COM Port Mode
Use this item to select the COM port mode. The options are RS232 Mode, RS422 Mode,
and RS485 Mode.
Serial Port 2 Conguration
Serial Port
Disabled and Enabled
Device Settings
This item displays the base I/O port address and the Interrupt Request address of a serial
Change Port Settings
Port 2. Select Auto to allow the BIOS to automatically assign the base I/O and IRQ address
Auto, (IO=2F8h; IRQ=3), (IO=3F8h; IRQ=3, 4,
5, 6, 7, 9, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12), (IO=3E8h; IRQ=3, 4, 5,
6, 7, 9, 10, 11, 12), and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12).
COM Port Mode
Use this item to select the COM port mode. The options are RS232 Mode, RS422 Mode,
and RS485 Mode.
Hardware Monitor
PC Health Status
• Peripheral temperature
• System temperature
To Next Page
Loading...
