Supermicro SuperServer E50-9AP-N5 - Jumper Settings; How Jumpers Work

35
Chapter 3: Motherboard Connections
3.4 Jumper Settings
How Jumpers Work

settings. Jumpers create shorts between two pins to change the function of the connector.
           
             

Note:             
󰀨
Connector
Pins
Jumper
Setting
3 2 1
3 2 1
JLCDPWR1
               

Force Power On

power cord is plugged in. When enabling force power on and AC power recovery, the system

setting information.
LVDS Power Source Selection
Jumper Settings
Jumper Setting Denition
Pins 1-3 3.3V (Default)
Pins 3-5 5V
Force Power On
Jumper Settings
Jumper Setting Denition
Pins 2-4 Force Power On (Default)
Pins 4-6 Power Button On